Page 2 of 2
Re: DIY Speaker Gallery - Show off your work
Posted: Tue Jan 26, 2016 4:05 am
by knifejames
These Satori drivers are great!
Im very happy with the Kairos. Thank You Jeff!
I dont like the card port.
the construction is Bamboo, white oak and some dark hardwood from a orangutang's habitat.
I cut the bamboo and oak on a cnc router so the drivers fit into the oak perfect.
the bamboo I profile cut then stacked to form the top and the bottom front radius.
the hardwood is used on the back(top) and the bottom pannel.
I have photos of the inside of the enclosure also.
The wall thickness of the enclosure varies but is at minimum 30mm all the wood used is super dense too.
Re: DIY Speaker Gallery - Show off your work
Posted: Sun Apr 17, 2016 10:45 pm
by djverne
- Alpair 6m Mini
- Alpair 6m Mini
Re: DIY Speaker Gallery - Show off your work
Posted: Sun Apr 17, 2016 10:48 pm
by djverne
Re: DIY Speaker Gallery - Show off your work
Posted: Sun Apr 17, 2016 10:53 pm
by djverne
Re: DIY Speaker Gallery - Show off your work
Posted: Mon May 16, 2016 2:05 pm
by Researcher
djverne wrote:IMG_0099.JPG
Beautiful veneer...what is it?
I also like your tube amp, which model is it?
Cheers
Re: DIY Speaker Gallery - Show off your work
Posted: Thu Jul 21, 2016 3:39 am
by Wolf
"Cecropia" Morel CAW634/TL N26MGR-G:
Unfortunately, the thread is at another site.
Xover:
FR:
Internal shot:
Uberfahrt "Crossover Cake":
Re: DIY Speaker Gallery - Show off your work
Posted: Thu Aug 18, 2016 6:15 am
by RayJ
End result pictures of my build of the Mandolins by Jeff Bagby. Left right and center channels. I bought a new amp/receiver for these. The onkyo rz800 has no trouble driving these. After about 5 hours of listening the speakers really came to life! Its great to have great sounding music. I got so used to listening to loud distortion before these! Really enjoy them. Now I have the bug too.
Re: DIY Speaker Gallery - Show off your work
Posted: Tue Sep 05, 2017 4:08 pm
by Whoismestas
knifejames wrote:These Satori drivers are great!
Im very happy with the Kairos. Thank You Jeff!
I dont like the card port.
the construction is Bamboo, white oak and some dark hardwood from a orangutang's habitat.
I cut the bamboo and oak on a cnc router so the drivers fit into the oak perfect.
the bamboo I profile cut then stacked to form the top and the bottom front radius.
the hardwood is used on the back(top) and the bottom pannel.
I have photos of the inside of the enclosure also.
The wall thickness of the enclosure varies but is at minimum 30mm all the wood used is super dense too.
IMG_0329.jpg
IMG_0315.jpg
IMG_0313.jpg
Anybody know how to contact this guy? These are amazing
